42
Change User Passcode by System
Administrator (Using CentreWare Internet
Services)
1. Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field Press the
<Enter> key.
2. Enter System Administrator’s ID and passcode if prompted.
3. Click the [Properties] tab.
4. Click [+] on the left of the [Security] folder.
5. Click [Authentication Configuration.
6. Click the [Next] button.
7. Enter the user number in [Account Number] and Click [Edit] button.
8. Enter a new passcode from 9 or more characters in [Passcode].
9. Enter the same passcode in [Retype Passcode] and click the [Apply] button.
To Next Page
Loading...
