Xerox Multi-Function Device Security Target
12
Copyright
2013 Xerox Corporation. All rights reserved.
Xerox WorkCentre
5845/5855/5865/5875/5890 User Guide
Xerox WorkCentre 7220/7225 User Guide
Xerox WorkCentre 7800 Series User Guide
Xerox ColorQube 9301/9302/9303
ConnectKey Controller User Guide
Secure Installation and Operation of Your
Xerox WorkCentre 5845, 5855, 5865, 5875,
5890, 7220, 7225, 7830, 7835, 7845, 7855 &
ColorQube 9301, 9302, 9303
The TOE’s physical interfaces include a power port, an ethernet port, USB
ports, serial ports, fax ports (if fax accessory is installed), LUI with keypad, a
document scanner, a document feeder and a document output.
1.3.2. Logical Scope of the TOE
The logical scope of the TOE includes all software and firmware that are
installed on the product (see Table 3). The TOE logical boundary is
composed of the security functions provided by the product.
The following security functions are controlled by the TOE:
Image Overwrite (TSF_IOW)
Authentication (TSF_ AUT)
Network Identification (TSF_NET_ID)
Security Audit (TSF_FAU)
Cryptographic Operations (TSF_FCS)
User Data Protection – IP Filtering (TSF_FDP_FILTER)
Network Security (TSF_NET_SEC)
Information Flow Security (TSF_ FLOW)
Security Management (TSF_FMT)
User Data Protection – Disk Encryption (TSF_FDP_UDE)
1.3.2.1. Image Overwrite (TSF_IOW)
The Immediate Image Overwrite (IIO) function overwrites files created during
job processing. The IIO function automatically starts for all abnormally
terminated copy, print, scan and fax jobs stored on the HDD prior to coming
on-line at reboot or after a power failure/disorderly shutdown.
To Next Page
Loading...
Need help?
General
