Xerox  Multi-Function Device Security Target 
 
64 
Copyright
 2013 Xerox Corporation. All rights reserved. 
Supports audit 
policies by requiring 
time stamps 
associated with 
events. 
O.DOC.NO_DIS 
O.DOC.NO_ALT 
O.FUNC.NO_ALT 
O.PROT.NO_ALT 
O.CONF.NO_DIS 
O.CONF.NO_ALT 
Protection of User 
and TSF Data from 
unauthorized 
disclosure or 
alteration 
FCS_COP.1 
FCS_CKM.1 
FCS_CKM.2 
FCS_CKM.4 
Supports protection 
by providing 
cryptographic 
operations for secure 
communication and 
enforces disk 
encryption. 
Enforces protection 
by requiring the use 
of trusted channels 
for communication 
of data over 
Shared-medium 
Interfaces. 
6.7.  Rationale for Security 
Assurance Requirements 
This Security Target has been developed Using the IEEE Standard Protection 
Profile  for  Hardcopy  Devices  in  IEEE  Std  2600™  -2008  Operational 
Environment B (IEEE Std. 2600.2-2009) and related SFR packages, EAL2+ 
augmented  with  ALC_FLR.2;  which  was  created  to  describe  Hardcopy 
Devices used in commercial information processing environments that require 
a  moderate  level  of  document  security,  network  security,  and  security 
assurance. The TOE environment will be exposed to only a low level of risk 
because  it  is  assumed  that  the  TOE  will  be  located  in  a  restricted  or 
monitored  environment  that  provides  almost  constant  protection  from 
unauthorized  and  unmanaged  access  to  the  TOE  and  its  data  interfaces. 
Agents  cannot  physically  access  any  nonvolatile  storage  without 
disassembling the TOE. Agents have limited or no means  of infiltrating the 
TOE  with code to  effect a  change and  the TOE  self-verifies its  executable 
code to detect unintentional malfunctions. As such, the Evaluation Assurance 
Level 2 is appropriate. 
While  IEEE  Std.  2600.2-2009  augments  EAL2  with  ALC_FLR.2,  Flaw 
reporting procedures, this ST augments EAL2 with ALC_FLR.3, Systematic 
flaw  remediation.    ALC_FLR.3  is  hierarchical  to  ALC_FLR.2  and 
encompasses  all  requirements  of  ALC_FLR.2  plus  some  additional 
requirements.  ALC_FLR.3 ensures that instructions and procedures for the 
reporting and  remediation of identified  security  flaws are  in place and their