Xerox XC351

lnstallation
Slide the toner cartridge
in
until
it locks in
olace.
Close the
front
cover.
XC351 skip to
step 12
10.Install
the
paper
tray by
insefiing it
at
an
upward angle into the
grooves
on the side
of the
paper
feed
slot.
11.Open
and unfold the exit tray.
12. Plug the
power
cord
into
the
copier and
then
plug
the other end of the cord
into
the
nearest
outlet.
Note: Ensure
that the
power
cord is
inserted
firmly.
13.Turn
the
power
on.
Note:
Wait
approximately 1 minute for the
Ready indicator
to
light.
CAUTION:
Prior
to making copies, ensure
that the areas to the right and left sides of the
copier are free of
obstructions
which may
prevent
free motion
of the document
glass.
8.
a
10