Xerox XC351 User Manual

.'i'.
Toner Cartridge
Replacement
When insufficient toner
is detected at the start of copying, the toner
cartridge
replacement
indicator will light and
the
copier searches for toner
for
up to
1 minute. During the time that
the
copier
is searching for
toner
the document
glass
will slide
back
and
forth. lf
the copier detects
insufficient toner
again, the
indicator will flash
and the copier
will
stop.
At
this time,
you
must replace the toner cartridge.
During multiple sheet copying
of a dark original, the toner
cartridge
replacement
indicator may flash and the copier may stop even though
toner
remains in the cartridge.
lf this occurs, turn
the
power
switch off and
then on again,
and restart copying.
Note: A few more copier
may
be
made
by using this
procedure.
Vigorously shake the cartridge
horizontally 4
or 5 times, tap the top of the
cartridge
(label
side),
with
your
hand then reinsert the cartridge into the
coprer.
1. Turn off the
power
switch.
2. Press
the
front
cover oDen button and
open the front cover.
3. Press down on the catch
and oullthe toner
cartridge
out
of the copier.
Note: Help
the environment by recycling
your
used toner
cartridge.
Refer
to the Xerox
Green
Team
brochure
packed
with the toner
cartridge for instructions on returning
the used
toner cartridge to Xerox.
4. Vigorously
shake
the
new
toner cartridge
horizontally four
or
five
times and then
remove
the cover.
.
Save the box and toner cartridge
cover
to
pack
the toner cartridge for
shipping
or movrng.
23

Xerox XC351 Specifications

General

Brand	Xerox
Model	XC351
Category	Copier
Language	English