Configuring 3-Way SLI
103
configure RAID in BIOS, 54
configure USB in BIOS, 54
connect IDE drives, 14
connect power to motherboard, 13
create custom profiles, 78
install CPU, 8
install DIMMs, 9
set CMOS jumper, 24
set CPU parameters, 70
set date and time, 30
set disk priority, 35
set fan speeds in BIOS, 62
set fan speeds with BIOS, 64
set GPU parameters, 75
set IDE functions in BIOS, 53
set memory parameters, 72
set motherboard parameters, 71
set network boot priority, 35
set power management functions in
BIOS, 56
set system voltages in BIOS, 48
view system information, 77
HPET, 51
HT Multiplier, 41
HT Spread Spectrum, 41
I/O shield, 10
I/O Shield, 3
IDE connector, 14
IDE DMA transfer access, 53
IDE Function Setup menu, 53
IDE Prefetch Mode, 53
IDE/SATA sub-menu, 30
IDE-ATA 133 HDD Cable, 4
IEEE 1394 expansion cable, 17
IEEE 1934a Connector Pins, 17
installing
CPU, 8
I/O shield, 10
memory DIMMs, 9
motherboard, 10
installing software, 65
Integrated Peripherals menu, 52
Intel microprocessor, x
internal headers, 16
PWRHD_LED, 16
PWRLED, 16
PWRSW, 16
IRQ Resources, 61
LBA, 31
Legacy ISA, 61
Limit CPUID MaxVal, 46
LI-Ready Memory, 42
load plate, 8
MAC Config menu, 55
MEM (DDR), 44
Memory bank switch, 73
memory support, x
Memory Timing Setting, 44
memory, setting parameters, 72
microprocessor, x
To Next Page
Loading...
Need help?
General
