XFX nForce 790i Ultra 3-Way SLI Motherboard
32
Drive A
None ..... [ ]
360K, 5.25 in. ..... [ ]
1.2M, 5.25 in. ..... [ ]
720K, 3.5 in. ..... [ ]
1.44M, 3.5 in. ..... [ ]
2.88M, 3.5 in. ..... [ ]
:Move ENTER:Accept ESC:Abort
Halt On
All Errors ..... [ ]
No Errors ..... [ ]
All , But Keyboard ..... [
]
All , But Diskette ..... [ ]
All , But Disk/Key ..... [ ]
:Move ENTER:Accept ESC:Abort
Drive A
The Drive A option allows you to select the kind of FDD to install.
Options are:
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
Use the Page Up and Page Down keys to scroll
through the options or press Enter to display
the sub-menu. Use the arrow keys to
position the selector in the option you choose. Press Enter to accept the
changes and return to the Standard CMOS Features menu.
Halt On
Halt On determines whether or not the computer stops if an error is detected
during power on. Use the Page Up and Page Down keys to scroll through the
options or press Enter to display the Halt On sub-menu. Use the arrow keys
to position the selector in the option you choose. Press
Enter to accept the
changes and return to the Standard CMOS Features menu.
All Errors
Whenever the BIOS detects a nonfatal
error, the system stops and prompts you.
No Errors
System boot does not stop for any detected
errors.
Drive A [1.44, 3.5 in.]
Halt On [All , But Keyboard]
Drive A [1.44, 3.5 in.]
Press ENTER to display sub
Press ENTER to display sub
To Next Page
Loading...
Need help?
General
