12 13
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20
cm between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Specifications
Name
Model
Input
Wired Technology
Wireless Technology
Power Consumption
Time to Enter the Condition
Operating Temperature
Xiaomi Router BE3600
RN06
12 V 1.5 A
1 × 10/100/1000/2500 Mbps WAN/LAN auto-sensing port
3 × 10/100/1000 Mbps WAN/LAN auto-sensing port
2.4 GHz Wi-Fi (688 Mbps), 2 × 2 MIMO
5 GHz Wi-Fi (2882 Mbps), 2 × 2 MIMO
Networked standby mode: ≤ 7.2 W
Networked standby mode: ≤1 min
0
℃
to 40
℃
·
·
Notes:
The network standby power consumption is 8.1 W if all wired network ports are connected and
all wireless network ports are activated.
You can activate or deactivate the Wi-Fi network in the "Settings" of the management page
miwifi.com.
Manufacturer: Beijing Xiaomi Electronics Co., Ltd.
Address: Room 802, Floor 8, Building 5, No.15 KeChuang 10th Road, Beijing Economic and
Technological Development Zone, Beijing City, China
For further information, please go to www.mi.com
The product is in compliance with UK PSTI regulations, the full text of
declaration of conformity is available at the following internet address:
https://www.mi.com/global/service/support/declaration.html
https://www.mi.com/global/support/faq/details/KA-348478
Firmware update
Xiaomi routers support firmware update, please go to
https://www.mi.com/global/support/faq/details/KA-348402 for how to update.
For the relative policies of security vulnerability fixes, please follow
To Next Page
Loading...
