Xiaomi Redmi AirDots 2 Manual | How to Pair / Connect?
To iOS and Android phones
Step 1: Take both earbuds out of the charging case. They will turn on and pair to each other
automatically and a white light will start flashing quickly. When it starts flashing slowly, they
will be ready to pair to any device.
In case that the earbuds don’t turn on automatically, all you have to do is to press and hold the
multifunction touch button on both earbuds for about 2 seconds. After that, a white light will turn
on and they will turn on.
Step 2: Go to the device’s Bluetooth settings.
Step 3: Select “Redmi AirDots 2_R” or “Redmi AirDots 2_L”. If a password is needed, type
“0000”.
Step 4: After that, the pairing will be done.
To PC (Windows)
Step 1: Turn on Window’s Bluetooth.
Step 2: Go to the settings.
Step 3: Go to “Bluetooth and other devices”.
Step 4: Click on “Add device”.
Step 5: Click on Bluetooth.
Step 6: Take both earbuds out of the charging case. They will turn on and pair to each other
automatically and a white light will start flashing quickly. When it starts flashing slowly, they
will be ready to pair to any device.
In case that the earbuds don’t turn on automatically, all you have to do is to press and hold the
multifunction touch button on both earbuds for about 2 seconds. After that, a white light will turn
on and they will turn on.
Step 7: Select “Redmi AirDots 2_R” or “Redmi AirDots 2_L”. If a password is needed, type
“0000”.
Step 8: After that, the pairing will be done.
To Next Page
Need help?
General
