Xilinx AC701 - AC701 BIST Design Description

AC701 BIST Design Description
Description
– The Built-In System Test (BIST) application uses an EDK MicroBlaze system to
verify board functionality. A UART based terminal program interface offers
users a menu of tests to run.
Reference Design IP
– EDK IP: MicroBlaze, axi_interconnect, lmb_v10, mdm, lmb_bram_if_cntlr,
bram_block, axi_bram_ctrl, axi_uart16550, axi_ethernet, axi_dma, axi_gpio,
clock_generator, axi_7series_ddrx, proc_sys_reset, axi_intc, axi_timer, axi_iic,
axi_emc, axi_xadc, chipscope_icon, chipscope_vio, util_vector_logic
• Embedded System Tools Reference Guide (UG111)
• http://www.xilinx.com/ise/embedded/edk_ip.htm
Reference Design Source
– rdf0220.zip
– Available through http://www.xilinx.com/ac701
Note: Presentation applies to the AC701