To Next Page
A
ambercamachoJul 30, 2025
What to do if the Xilinx Motherboard TRD Setup screen does not detect the board?
- DDarren LaneJul 30, 2025
If the TRD Setup screen in the GUI doesn't detect the Xilinx Motherboard, you can try the following steps: * First, check Device Manager to see if the drivers are loaded under 'Xilinx PCI Express Device'. * Also, check the PCIe Link Up LED on the board. * If that doesn't work, remove non-present devices from Device Manager: 1. Open a command prompt with Administrator privileges. 2. Enter 'set devmgr_show_nonpresent_devices=1 start devmgmt.msc' at the command prompt. 3. In Device Manager, go to the View menu and select 'Show hidden devices'. 4. Uninstall all non-present/hidden devices (indicated by lighter text), including removing the driver if prompted. * Finally, invoke the GUI of the reference design to check if it now detects the board.
General
