ML505/ML506/ML507 Getting Started Tutorial www.xilinx.com 21
UG348 (v3.0.2) October 9, 2008
ML50x Demonstrations in System ACE CF
R
Board Verification Using XROM
Location
System ACE configuration address 4.
From the Bootloader menu, select option 4 to start the XROM application.
Description
The XROM application performs board diagnostics and testing.
Instructions
On the terminal window associated with the serial port, enter the number 1 to select the
Tests sub-menu. Make further selections as desired to run board diagnostic tests. The tests
are numbered as follows:
1. Test DDR SDRAM
2. Test ZBT SRAM
3. Test LEDs
4. Test Pushbuttons
5. Test Dip Switches
6. Test Character LCD
7. Test PS/2 Keyboard
8. Test SMA Connectors
9. Test VGA Output
A. Test Flash Memory
B. Print IIC EEPROM Contents
C. Test Piezo
0. Return to the Main Menu
To Next Page
Loading...
