Xinje XL Series - 4-10-2 Write Clock Data [TWR]

186
 After reading the RTC by TRD instruction, the value will show in decimal format.
 After reading the RTC by TRD, the value becomes decimal value.
 after executing TRD instruction, D0 to D6 are occupied.
4-10-2 Write Clock Data [TWR]
1) Summary
Write the clock data:
Write clock data [TWR]
16 bits
-
32 bits
TWR
Execution
condition
Normally ON/OFF,
rising/falling edge
Suitable
Models
XD, XL
Hardware
requirement
Software
requirement
-
2) Operands
Operands
Function
Data Type
S
Write the clock data to the register
16 bits, BIN
3) Suitable Soft Components
Operands
Word soft elements
Bit soft elements
System
Constan
t
Module
System
D
F
D
T
D
C
D
D
X
D
Y
D
M
D
S
K/H
I
D
Q
D
X
Y
M
S
T
C
Dn.
m
D
●
●
●
●
●
●
●
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S, HS; T
includes T, HT; C includes C, HC.
TWR D0
X0
S·
Write the RTC value to the PLC.

Write the set clock data into PLC’s real time clock.

In order to write real time clock, please set the 7 registers value from D0 to D6.
Description
tudonghoatoancau.com