Xinje XL Series - 5-2 HSC Mode

201
COM
COM
X1
X0
X3
X2 X4
X5
X6
(2) The high-speed counting input of XD5-48D4T4 can receive differential signal (DIFF), please
be sure to choose differential signal (DIFF) encoder.
(3) When the counting frequency is higher than 25Hz, please select a high-speed counter.
5-2 HSC Mode
XD, XLseries high speed counter has two working mode: Single-phase increasing mode and
AB phase mode.
Under this mode, the count value increase at each pulse’s rising edge;
Single-phase Increasing Mode
Count input
Sensor
Rotary encoder
A
B
tudonghoatoancau.com