334
After setting the path, the new library file window is displayed, and the library information
(name, version, description, author) is filled in. If the library name is the same as any library
name in the current library, the following pop-up window will appear:
8-8-3-3 Create new source
In the "project" toolbar on the left, select the project library or global library to which the
source file needs to be added in the "function library", right-click and select "new source file"
to edit the name, version, description, author and other information of the source file in the
pop-up interface, as shown in the following figure:
tudonghoatoancau.com
To Next Page
Loading...
