XLT Ovens X3G-3270-1B Series User Manual

XLT Ovens
PO Box 9090
Wichita, Kansas 67277
US: 888-443-2751 FAX: 316-943-2769 INTL: 316-943-2751 WEB: www.xltovens.com
XLT Gas Oven & XLT Hood
Installation & Operation Manual
XD 9004A
SHHE
01/02/2020
For use with the following XLT Gas Hood Versions:
Standard (S) E
For use with the following XLT Gas Oven Versions:
Standard (S) H
Current versions of this manual, Technical/Rough-In Specifications, Parts & Service Manual, Fire
Suppression Installation, Architectural Drawings, & a list of International Authorized Distributors
are available at: www.xltovens.com
2000887
Read This Manual Before Using This Appliance.
Original Instructions

XLT Ovens X3G-3270-1B Series Specifications

General

Brand	XLT Ovens
Model	X3G-3270-1B Series
Category	Oven
Language	English

Summary

Warning & Safety Information

Warranty - US and Canada

Installation Responsibilities

Receiving & Inspection

Oven Requirements

Gas Supply Requirements

Details on gas supply, meter, regulator, piping, and materials for XLT ovens.

Gas Oven Electrical Requirements

Electrical specifications for XLT ovens, including voltage, amperage, and Hertz.

Electrical Grounding Instructions

Instructions on how to properly ground XLT ovens for safety and code compliance.

Oven Only Rough-In Specifications

Oven Assembly

Oven Assembly Safety Information

Safety warnings and precautions related to moving, stacking, and using lifting jacks.

Oven Connection

Oven Fire Suppression

Oven Ventilation Guidelines

Ventilation Requirements

Requirement for powered ventilation hoods and make-up air, considering local codes.

Oven Initial Start-Up

Start-up Procedure

Step-by-step instructions for verifying oven installation and making field adjustments.

Oven Operation

Temperature Adjustment

How to adjust oven temperature using the control panel's UP/DOWN arrows and ENTER.

Belt Time Adjustment

Oven Operator Controls

Oven Cleaning

Oven Maintenance

Oven Troubleshooting

Mechanical Function Troubleshooting

Checks and verification steps for troubleshooting mechanical and operational issues.

Hood Installation

Recommended Exhaust Flow Rates

Hood Electrical Requirements

Hood Electrical Inputs

Hood Electrical Outputs

Hood Electrical Connections

Hood Assembly

Stacking Hood on Ovens

Hang Hood from Ceiling Joists

Instructions for safely suspending the hood from ceiling joists using all-thread.

Hood Connection

Hood Initial Start-Up

Variable Frequency Drive Adjustments

Factory and field adjustments for the VFD controller for fan speed control.

Hood Operator Controls

Hood Cleaning

Oven Initial Start-Up Checklist

Step 1: Fill Out Information

Instructions to fill out all required information on the checklist legibly.

Step 2: Gas Pressure Measurement

Measure and document static gas pressure using a manometer.

Hood Initial Start-Up Checklist

Step 1: Hood Information Entry

Fill out all required information for the hood installation legibly.

Step 2: Verify Hood Information

Verify all entered information is correct before powering on the hood.