To Next PageTo Next Page
Need help?Do you have a question about the XLT Ovens X3F3-1832 Series and is the answer not in the manual?
Crucial safety directives for safe operation and preventing hazards.
Explains hazard symbols and safety terms used in the manual.
Details warranty terms for North American customers.
Details warranty terms for customers outside North America.
Pre-installation checks and site requirements for proper setup.
Specific duties for installing the equipment correctly.
Details available oven models and their features.
Specifies dimensions for shipping crates.
Provides physical size and weight data for ovens.
Details necessary utilities and clearances for oven installation.
Specifics on gas line sizing, pressure, and connections.
Guidelines for safely grounding the oven to prevent shock.
Instructions for assembling oven bases and stacking units.
Procedures for safely stacking multiple oven units.
Details on connecting gas, electrical, and restraint systems.
Details on the fire suppression system and its installation.
Explains ventilation needs, make-up air, and performance tests.
Steps for initial setup and warranty validation.
Explains the oven's control interface and basic functions.
How to adjust conveyor speed and oven temperature.
Accessing device identification details.
Configuring belt length, width, and fan type.
Navigating menus and locking control settings.
Steps for cleaning or replacing the fan filter.
Step-by-step guide for cleaning the oven components.
Recommended daily, weekly, and monthly maintenance tasks.
Tips for achieving desired cooking results and performance.
Troubleshooting common mechanical problems and non-operation.
Outlines buyer's duties for proper hood installation.
Information on hood weight and required structural support.
Details the main parts of the AVI Hood and their roles.
Specifies dimensions for hood shipping crates.
Provides physical dimensions and weight for the hood.
Specifies recommended airflow volumes for various settings.
Details electrical supply needs for the hood.
Describes power outputs for connected devices like ovens.
Visual guide to rough-in requirements for hood installation.
Details electrical connections for the VFD control box.
Wiring for makeup air damper control.
Wiring for the fire alarm system connection.
Steps to prep ovens before hood attachment.
Instructions for using lifting equipment for hoods.
Procedure for safely placing the hood onto ovens.
Configuring VFD settings for airflow control.
Steps for initial hood operation and verification.
Explanation of the Hood User Interface and its functions.
Accessing advanced settings and diagnostic features.
Instructions for installing valance brackets and panels.
Instructions for applying the hood duct wrap kit.
Recommended daily, weekly, and monthly cleaning tasks for the hood.
Electrical diagram for a standard 1-box, 120 VAC oven.
Electrical diagram for a world 1-box, 230 VAC oven.
Electrical diagram for an Australian 1-box, 230 VAC oven.
Electrical diagrams for standard 2-box ovens.
Electrical diagrams for world 2-box ovens.
Electrical diagrams for Australian 2-box ovens.
Electrical diagram for a standard hood with fire suppression and VFD.
Electrical diagram for a world hood with fire suppression and VFD.
Compliance standards for standard XLT ovens.
Compliance standards for world XLT ovens.
Compliance standards for standard and world XLT hoods.
Compliance standards for Australian XLT ovens.
Compliance standards for Korean XLT ovens.
Form for verifying oven installation and initiating warranty.
Form for verifying hood installation and initiating warranty.
Visual overview of a complete system setup in a store.
General