46
and to tune in steps of .2, i.e.,
99.3 to 99.5. Press
and
to tune in steps of 1, i.e., 99.3 to
100.3. Press the Select button
to select the FM channel.
v. Start Using is highlighted.
Press the Select button.
vi. The FM channel you selected
will be confirmed on the display
screen. The onyX will tune to
the FM channel.
9 You should hear XM channel 1
through your vehicle’s FM radio. If
you are satisfied with the sound
quality, you’re done! You are now
ready to activate your onyX.
10 If the selected FM channel doesn’t
work well for you, work down the
list of FM channels until you find
one that allows you to hear XM
clearly. Each time, you will need to tune your vehicle’s FM radio to the
FM channel and then set your onyX to transmit on the same FM channel
(steps 7 & 8).
If the signal reception is good, but there is no XM audio when tuned to channel 1,
Set your vehicle radio to the
above channel to enable audio.
99.3 FM
Vehicle Installation
FM Channels
current
FM 1
FM 2
FM 3
FM 4
FM 5
97.9
_ _ _
_ _ _
_ _ _
_ _ _
To Next Page
Loading...
Need help?
General
