47
verify that both the onyX and your vehicle’s FM radio are tuned to the same
FM channel (steps 7 & 8). Also ensure the chosen FM channel is a suitable
one to use in your area (step 5). Verify that nothing is plugged into the AUDIO
connector on the PowerConnect Vehicle Dock. Refer to “Troubleshooting” on
page 102 for additional help.
Option 4: FM Direct Adapter (FMDA) Installation
The FMDA needs to be installed by a professional installer. Professional
installation can help improve your radio’s reception and significantly reduce
the visibility of wires. To learn more, check with the retailer where you bought
your radio, or go to xmradio.com/accessories.
To Next Page
Loading...