To Next Page

To Previous Page

4 User Guide YB-253 Version 3.10

xxx

Figure 29 Removing instrument tube

When refitting the instrument hoses, please check that instru-

ment tube number and the number marked on the instrument

bridge are identical.

In case you replace an instrument tube, please be sure to affix

the correct identification number to the new tube.

xxx

Figure 30 Check for identical numbers

In the event that the instrument hoses have been

removed, one must ensure that the plugs and sockets are

completely dry before the hoses are re-mounted on the in-

strument bridge again!

5.4 Bien Air MC3 micro motor

XO recommends annual control and servicing of micro motors

and contra-angles.

Replace the bulb as follows:

1 Pull the motor cover (1) off.

2 Change the bulb (2) (ref.no. HE-005)..

3 Avoid touching the bulb with your fingers. Use clean gloves

or a clean piece of cloth.

Other manuals for Xo 4

Questions and Answers:

Need help?

Do you have a question about the Xo 4 and is the answer not in the manual?

General