Your Xplore Tablet might not start for several reasons. The battery could be defective or completely discharged, so try connecting an external power supply or installing a charged battery. The internal components might be outside the acceptable operating temperature range. If the computer is at a critical thermal limit, move it to a cooler location after being suspended. Also, ensure the computer is plugged into an AC/DC power source if running on battery and the charge level is critically low.
A
Amy RodriguezAug 11, 2025
What to do if the display screen is blank or difficult to read on my Xplore iX101B2 Tablet?
J
Joshua DavisAug 12, 2025
If the display screen on your Xplore Tablet is blank or hard to read, the brightness might be set too low. To adjust it, go to Settings Icon, then Display, and then Brightness. Also, the video time-out may have expired, in this case, tap the display screen to reactivate it.
J
Jacob ChandlerAug 22, 2025
Why is the status LED red and blinking on my Xplore iX101B2?
M
Michael LunaAug 22, 2025
If the status LED on your Xplore Tablet is red and blinking, it means the computer is powered on and running on battery, but the battery charge level is at a minimum warning level. To resolve this, plug the computer into an AC/DC power source or install a charged battery.
To Next Page
General
