Rev.: 20160608
Platform: DBALL/DBALL2
Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Vehicle Application Guide
Page 2
The table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more
information on installation wiring, programming and troubleshooting for these vehicles.
Vehicles
2016
2015
2014
2013
2012
2011
PK-Immobilizer Bypass-Data No Key Req'd
AV-Parking Lights Control
CC-Heated Seats Activation
CC-Rear Window Defogger Activation
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Trunk / Hatch Release
Key2GO
RS-3x LOCK START (Start control using OEM Remote)
RS-3x LOCK STOP (Stop control using OEM Remote)
RS-Remote Start Ready
RS-SmartStart
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Trunk/Hatch Pin
ST-Brake Status (foot brake)
ST-Ignition Status
Chrysler
300/300c (Smart Key) 1 1 1 1 1 1 • • • • • • • • • • • • • • • • • • • • •
Dodge/Ram
1500 (Smart Key) 2 2 2 2 • • • • • • • • • • • • • • • • • • • •
2500 (Smart Key) 2 2 2 2 • • • • • • • • • • • • • • • • • • • •
3500 (Smart Key) 2 2 2 2 • • • • • • • • • • • • • • • • • • • •
Challenger (Smart Key) 1 1 • • • • • • • • • • • • • • • • • • • • •
Charger (Smart Key) 1 1 1 1 1 1 • • • • • • • • • • • • • • • • • • • • •
Durango (Smart Key) 1 1 • • • • • • • • • • • • • • • • • • • •
Journey (Smart Key) 1 1 1 1 1 1 • • • • • • • • • • • • • • • • • • • •
Jeep
Grand Cherokee (Smart Key) 2 2 2 • • • • • • • • • • • • • • • • • • • • •
Legend:
AV: Horn & Lights Control
CC: Comfort & Convenience Controls
DL: OE Door Lock & Alarm Controls
PK: Transponder & Immobilizer Override
RS: Remote Start & Status
SS: Entry Point Status-Security
ST: Function/Feature Status
This feature is mandatory.
Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses
an array of servers to generate a duplicate of the original key, allowing the installation of a remote starter without
having to give up a key.
The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.
All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also
appear on the flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information
will be required to complete the registration process, such as your Directed account number and store name.
Key2GO is compatible with XpressVIP 4.5 or higher and requires an XKLoader.
Refer to page 8 of this guide for instructions on how to program features using Key2GO.
* Features will only function if vehicle is equipment with OEM touchscreen radio package.