© Copyright 2016 - Xsarius
34
Search Transponder
Select in the main menu “TP search” and press “OK“.
Select the transponder. In this menu, you can Delete,
Add, Manual Search, Auto Search transponders.
In this menu, when you highlight the channel item, you
can press the F1 key to choose the transponder which
you want to delete, then press the F1 key to delete.
You can add the transponder which you want with
the F2 key. Here you can input new Frequency, Band
Width. Press the OK key to confirm the setting, then
this new transponder will be added to the Transponder
list. You can also highlight the channel item and press
the OK key to enter the transponder list, then highlight
the New TP item and press the OK key to add the new
transponder.
You can Manual Search the transponder which you want
with the F3 key. You will be asked to confirm whether
only search FTA channels or not. If you select “Yes”, you
will only search FTA channels.
You can search all transponders with the F4 key.
F1 button: Delete the satellite or transponder
F2 button: Preform a channelscan
F3 button: Change the DiSEqC settings
F3 button: Change the LNB type
4. User manual terrestrial
Press the “Menu” key to enter the main menu. In the menu choise “Terrestrial”.
To Next Page
Loading...
