© Copyright 2016 - Xsarius
37
4. User manual cable
Press the “Menu” key to enter the main menu. In the menu choise “Cable”.
Search Transponder
Select the mainmenu “Search TP” and press “OK”.
In this menu, you can Delete, Add, Manual Search,
network search, blind search.
In this menu, when you highlight the channel item,
you can press the F1 key to choose the transponder
which you want to delete, then press the F1 key to delete.
You can add the transponder which you want with the
F2 key. Here you can input new Frequency, Band Width.
Press the OK key to confirm the setting, then this new
transponder will be added to the Transponder list. You
can also highlight the channel item and press the OK key
to enter the transponder list, then highlight the New TP
item and press the OK key to add the new transponder.
You can Manual Search the transponder which you want
with the F3 key. You will be asked to confirm whether
only search FTA channels or not. If you select “Yes”, you
will only search FTA channels.
Network search
You can network search transponders with the F4 key.
Bilnd search
You can search all transponders with “Scan” key.
To Next Page
Loading...
