DS800 Page 11
Specifications
Inputs 8 electronically balanced.
Impedance (microphone) 2k ohms.
Impedance (Line) 10k ohms.
CMRR >80dB @ 1kHz.
Outputs
FOH 8 electronically balanced.
MON 8 electronically balanced.
Isolated Feeds 16 Transformer balanced. 2.5kVAC for 1 min. isolation.
Source Imp < 80ohms.
Min. Load 600ohm.
Max. Level +20dBm into 600 ohm load.
Gain. 10dB, 20dB, 30dB, 40dB or 50dB via 5 position switch.
Headroom meter 5 point LED @ 0, -6, -12, -18, -30dB below clipping.
Frequency Resp. ±0.5dB 20Hz - 20kHz.
Equivalent Input Noise 10dB Gain: < -112dBm
( 20Hz -20kHz. Unweighted) 20dB Gain: < -117dBm
30dB Gain: < -120dBm
40dB Gain: < -120dBm
Distortion < 0.01% @ 1kHz, +4dB output.
Connectors
Inputs 3 pin female XLR.(Pin 1 =Gnd, Pin 2 =Hot, Pin 3
=Cold.)
Outputs FOH. 3 pin male XLR.(Pin 1 =Gnd, Pin 2 =Hot, Pin 3 =Cold.)
Outputs MON. 3 pin male XLR.(Pin 1 =Gnd, Pin 2 =Hot, Pin 3 =Cold.)
Isolated Outputs 3 pin male XLR..(Pin 1 =N/C, Pin 2 =Hot, Pin 3 =Cold.)
Power 3 pin IEC.
Power 80 to 250VAC @ 50/60Hz.
Consumption < 40 watts.
Weight 8.1kg. Net (9.5kg. Shipping)
Size 3.5"(2U) * 19" * 12.2" (88 * 482 * 312mm) excluding
connectors.
Options = Transformers available.
Due to continuing product improvement the above specifications are subject to change.
To Next Page
Loading...
Need help?
General
