Need help?Do you have a question about the XTA DPA SERIES and is the answer not in the manual?
General| Damping Factor | >500 |
|---|---|
| Type | Power Amplifier |
| Channels | 2 |
| Inputs | Analog XLR, Digital AES/EBU |
| DSP | Yes |
| Network | Ethernet |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Signal to Noise Ratio | >110dB |
| Total Harmonic Distortion | <0.05% |
| Cooling | Variable speed fan |
| Power | Varies by model (DPA44, DPA48, DPA42C, DPA44C, DPA48C) |
| Dimensions | 483 x 88 x 380mm (2U) |
Guidance on connecting the amplifier to the power supply, including safety warnings.
Details on connecting balanced and unbalanced line audio signals via XLR.
Information on connecting speakers using Neutrik Speakon connectors and wiring.
Configuration of input gain, delay, and parametric EQ settings.
Configuration of output gain, polarity, delay, filters, EQ, limiters, and matrix gains.
Setting up the Ethernet, USB, or RS485 interface for remote control.
Procedure for configuring and enabling front panel security and parameter locking.
Procedure for clearing security if the unlock code is forgotten.
Detailed explanation of the program limiter and its automatic time constants.
Description of the peak limiter and its role in controlling signal overshoot.
Steps for connecting to the amplifier and selecting files to load.
To Next Page
