Enter Setup Code:
[ ]
Operating Your Amplifier: Resetting Back to Defaults & Clearing Security
If you need to quickly clear all current settings and memories, there are a variety of setup
control codes that can do this for you.
Default Settings
Your amplifier will start-up as a “four analogue inputs to four output system”, with no EQ or
limiting (apart from self-protective limiters) in place. The aux outputs will “mirror” the
analogue inputs (and so initially act just like “link” outputs, again with no EQ or limiting in
place).
Entering Start-up Control Codes
Turn the amplifier on with the BACK and ENTER keys held. The display will show:
Use the EDIT and MUTE keys to represent the characters A, B, C D for EDITs and 1, 2, 3, 4 for
MUTEs.
Type in one of the following codes to initiate a setup function:
D4B13D — clear all user memories and reset to defaults, keeping security and factory
alignment settings
A2341B — clear current settings to default (leaves memories, alignments and security)
AA2121 — clear security via the XTA supplied crack code (see page 61 for more information)