emory
Recall to Aux Outputs *
RECALL an Output Memory
94:LEFT SIDE 6 SUBS
Recalling a Memory…
When a memory is recalled, after choosing the type (Input, Output, Source or Everything),
recall of Output memories is further qualified by what bank of outputs the recalled data is to
affect — amplifier or auxiliaries.
To recall a memory, from the home screen, press MENU, choose the GLOBAL MEMORY
Sub-Menu and press ENTER.
Use the encoder or BACK and NEXT keys to choose either Input or Output memory type as
appropriate and press ENTER.
Use the encoder to choose the memory required, remembering that the list will only contain
memories of the chosen type, and so the numbers may not be contiguous (so there may be
gaps!)
Press ENTER and confirm. If the routing configuration of the memory just recalled is
different to the current configuration, the outputs will be muted for safety.
Dependant on the bank selected, the display will by default show the name of the last input,
amp output or aux output memory recalled, or the same on all three if an “Everything”
memory was recalled.
To Next Page
Loading...
Need help?
General
