Need help?Do you have a question about the XTA DS8000 and is the answer not in the manual?
Instructions for safely removing the unit from its packaging.
Information on power supply requirements and voltage compatibility for the unit.
Guidelines for proper rack mounting and ventilation for the unit.
Details on connecting audio signals to the unit's input XLR connectors.
Information on connecting audio signals from the unit's output XLR connectors.
Guidance on connecting power between DS8000 units for backup.
Explanation of the various controls and connectors on the front panel.
Description of the controls and connectors located on the rear panel.
Technical overview of the unit's internal signal flow and components.
How to connect pin 1 of transformer balanced outputs for grounding.
Method to lift input ground connections for isolation purposes.
Configuration settings for the AES digital output board, including clocking.
Setting for controlling external wordclock synchronization tolerance.
Setting the sample rate for the unit's internal clock.
Adjusting the ground reference for wordclock connections.
Technical details on AES output pin configurations and signal driving.
Routine cleaning and upkeep procedures for the unit.
Information regarding the product's warranty period and terms.
Available optional features that must be installed at the factory.
Detailed technical data and performance metrics of the DS8000 unit.
Explanation of audio splitter functionality and signal distribution.
Description of a basic passive splitter without isolation features.
Overview of passive splitters utilizing transformers for isolation.
Explanation of the DS8000's active splitter design with isolation.
To Next Page
General
