Page 23 DS8000 Operator’s Manual
Looking After your DS8000:
Looking After your DS8000:Looking After your DS8000:
Looking After your DS8000:
Maintenance
Before any routine maintenance, please ensure that your unit is disconnected from the mains
supply!
No internal maintenance of the unit is necessary. Check that the vents on the sides of the unit
(especially the power supply vents on the right hand side — with front panel facing you) are
free of dust and debris build-up. Should they get blocked, clean them using a vacuum cleaner
and a soft paintbrush to dislodge any build-up.
The casework of the unit may be cleaned with a lightly dampened cloth — do not use any
solvents as they will damage the paint finish and could remove printing.
If you have any doubts about carrying out maintenance, please refer to a service engineer or
contact your local dealer.
Warranty
Your DS8000 is guaranteed for a period of five (5) years from the date of purchase. We hope
that it gives you many more years of reliable service than this but, should anything go wrong,
please contact us to advise you about repairs or any spares you might require.
Please do not attempt to repair it yourself, as doing so will invalidate the warranty.
Our contact details are:
XTA Electronics Ltd,
The Design House
Vale Business Park
Worcester Road
Stourport on Severn
Worcs
England
DY 13 9BZ
Tel: +44(0)1299 879977
Fax: +44(0)1299 879969
email: sales@xta.co.uk for general enquiries
Our website is a great place to get started if you have any questions regarding the general use
of your unit or need copies of this manual in digital form, or datasheets and photographs. The
datasheets also contain architect’s and engineer’s specifications.
www.xta.co.uk
To Next Page
Loading...
Need help?
General
