SB120 Recumbent Bike
19
Button Functions
MODE: Press to select functions. Press the button and hold for two seconds to reset all
functions to zero, except ODOMETER.
Key Functions
SCAN: Press MODE button until “▼” appears at SCAN position, the console displays: time,
speed, distance, calories, odometer and pulse, in sequence for 6 seconds at a time
TIME: Displays the time from exercise start to the end
SPEED: Displays the current speed
DISTANCE: Displays the distance from exercise start to the end
CALORIES: Displays the calories burned from the exercise start to the end.
The calorie readout is an estimate for an average user. It should be used only as comparison
between workouts on this unit.
ODOMETER: Display the total accumulated distance you have traveled. The odometer does
not reset unless you remove the batteries.
PULSE: Displays an average current heart beat rate in beats per minute (BPM). To use this
feature, place hands on the pulse grips and hold for 6 ~ 7 seconds to get a more accurate
reading.
Please note that due to contact delay, the heart rate will be higher than the actual heart
rate during the rst 2 ~ 3 seconds of measurement, then will return to normal level. The
measurement value shouldn’t be regarded as the basis of medical treatment.
To Next Page
Loading...
Need help?
General
