SB120 Recumbent Bike
17
Final Considerations
• Tighten all bolts/nuts securely to complete assembly.
• The bike can be cleaned with a damp cloth and mild non-abrasive detergent. Do not use solvents.
• Make sure to tighten both pedals securely to the pedal crank arms as instructed.
• Store the bike Indoors. Excessive moisture can cause rust to the frame and damage to the
electronics.
• Place the bike in a such a way that there is room on all side of the bike to safely mount and dismount.
We recommend a minimum of 2 feet all around the bike to safely access the bike.
Adjusting Resistance
• Use the Tension Knob (No. 51) on to adjust the resistance. Level 1 is
the minimum resistance.
Transporting the Bike
• There is a set of transport wheels on the Front Stabilizer (No. 6). To move the bike
carefully tilt the handlebar forwards and roll away.
To Next Page
Loading...
Need help?
General
