10 11
ERROR ISSUE POSSIBLE CAUSE
Fridge does not work
Check if power is connected properly (check plugs are securely positioned and
positive and negative not reversed)
Check power switch in ON
Check if cooling unit ventilation is not blocked or restricted
Check the fuse in the rear of the unit and at the supply
Poor cooling performance
Check that the drawer is securely closed
Check if there is any damage to the drawer seals
Check if cooling unit ventilation is not blocked or restricted
Check the set temperature is adequate
Abnormal noise
Check if refrigerator is level
Check for vibration sources in surrounding objects
Check for loose items in the fridge
Water flow type noise is normal and not sign of any fault in the unit
Condensation
It is normal for some condensation to form on the refrigerator surface when
humidity is more than 75%
E1 Low Input Voltage
Power cord was inserted into the cigarette socket before car starts - wait for car
engine to start before plugging in
Battery protection level setting is too high - adjust the protection setting or
change to a power source with a higher output voltage
E2 Fan Fault Contact service to have the fan replaced
E3 Compressor Start Fault
Shut down the fridge for 5 minutes and restart it - if it doesn’t fix the issue, follow
the procedures for E1 error
E4 Compressor Operation Fault Check the input voltage to the fridge and restart
E5 Overheat of Controller
Shut down the fridge for 5 minutes and check for cooling unit ventilation
restrictions or blockages
E6 NTC Open or Short Circuit Contact service to have the NTC sensor checked
PART NO. DFR4020XTM
GROSS CAPACITY: 31L
CLIMATIC CLASS:
T/ST/N/SN
RATED VOLTAGE - DC: 12V / 24V or 14.5V DC
RATED CURRENT - DC: Up to 6A
PROTECTION LEVEL: III
REFRIGERANT TYPE/AMOUNT: R134a - 26g
FOAM VESICANT: Cyclopentane
TEMPERATURE RANGE: -20ºC to +10ºC
NET WEIGHT: 18KG
For further information or assistance please contact customer service on 1300 174 876
To Next Page
Loading...
