Xtool D8 User Manual

4
1 G
ENERAL
I
NTRODUCTION
The Xtool D8 smart diagnostic system is an advanced flatbed（建
议删除） scanning tool based on the Android operating system. It
supports multi-language switching and is suitable for different
countries and regions. The advantage of this OBDⅡscanner is not
only its comprehensive functions, including complete system
diagnosis, all OBD Ⅱ functions, various reset functions (IMMO /
EEPROM adapter / EPB (Electronic Parking Brake) reset / oil light
reset / SAS (Steering Angle Sensors) reset / TPS (Throttle
Position Sensor) matching / Injector coding / ABS (Anti-block
system) bleed / gearbox matching / gear learning / electronic
pump actuation / disable transport mode / SRS (Supplemental
Restrgint System) reset / exhaust post-processing / BMS matching
/ air suspension / cylinder / TPMS reset / tire refit / headlight
adjustment / windows Initialization/seat matching/DIY mode) can
also achieve faster and more accurate diagnosis.
TABLET
The main unit of the D8 is the tablet, which has a built-in VCI
module, which can be directly connected to the tablet and the car

Xtool D8 Specifications

General

Item	Description
Processor	Quad-core processor 1.8GHz
RAM	2G
Sensor	Gravity sensor
ROM	64G
Display	8-inch capacitive, 1024×768 resolution
Connectivity	USB Wi-Fi
Camera	8-megapixel autofocus rear camera with flash
Audio input/ Audio output	Microphone/ Loudspeaker
Ports	 USB3.0  DC charging port  VGA port
Battery	10000mAh 3.7V lithium polymer battery
Input voltage	12V DC
Operating temperature	-10~50℃
Relative humidity	< 90%

Weight and Dimensions

Dimensions	274.0×175.0×33.8 mm