47
so that the tablet computer can access the vehicle manufacturer's
server for update services.
⚫ Selecting the programming or coding function will open a menu of
operating options, which differs depending on the vehicle’s make and
model. Selecting a menu option either displays a programming
interface or opens another menu containing other options. When
performing programming or coding operations, follow all instructions
on the screen. The way and content of the information displayed on
the screen differ depending on the type of operation being performed.
IMPORTANT
When reprogramming onboard, please always make sure the vehicle
battery is fully charged and in good working condition to avoid the
operation failure caused by the abnormal voltage below the proper
operating voltage. Sometimes the failure can be recovered, but the failed
reprogramming can also cause a fault in the control module. We
recommend connecting an external battery maintainer to the vehicle to
ensure a steady voltage is maintained throughout programming. The
required voltage differs by the vehicle manufacturer. Consult vehicle
manufacturer for correct voltage to be maintained.
Occasionally a flash update procedure may not complete properly. Common causes of
flash errors include poor cable connections between the tablet, VCI, and vehicle, the
vehicle ignition is switched off before the flash procedure is complete, or low vehicle battery
voltage.
If the process quits, recheck all the cable connections to assure good communications
and initialize the flash procedure. The programming procedure will automatically repeat if
To Next Page
Loading...
Need help?
General
