71
5. Press the F2 button and wait until a message of ‘Match
successfully’ pops up.
5.7 INJECTOR CODING
This function can write the identification code of the fuel injector
into the ECU so that the ECU can recognize and work normally.
Write actual injector code or rewrite code in the ECU to the
injector code of the corresponding cylinder for controlling
accurately and correcting cylinder injection quantity.
After the ECU or injector is replaced, the injector code of each
cylinder must be confirmed or re-coded so that the cylinder can
better identify injectors to accurately control fuel injection.
In general cases, there is no need to do the coding matching function after
cleaning.
The identification of the fuel injector includes its working accuracy value
and type value. When replacing it, you need to find the corresponding model
for replacement.
At present, mainstream cars support injector coding functions.
To Next Page
Loading...
Need help?
General
