Xtool IP819 User Manual

47
Figure 5-24 Sample of injector coding function (screen 3)
6. Wait until the message ‘Write successfully’ pops up.
7. Turn off the ignition switch.
8. Wait until the message asked you to turn on the ignition switch.
9. Re-enter the Fuel injection nozzle injection volume adjustment
menu to check whether the new value(s) are shown.
Figure 5-25 Sample of injector coding function (screen 4)

Xtool IP819 Specifications

General

Brand	Xtool
Model	IP819
Category	Diagnostic Equipment
Language	English