Xtool KC501 User Manual

KC501 Key Programming
4 /
7
1. PRECAUTIONS AND WARNINGS
KC501 programmer is a device launched by Shenzhen Xtooltech Co., Ltd.
to assist car locksmiths in anti-theft matching related functions. In order to
avoid personal injury and damage to the vehicle during related operations,
please read this manual before operating specific functions and strictly
observe the following safety precautions:
 Run the vehicle in a well-ventilated place.
 Diagnose and repair or disassemble ECU in a safe surrounding
environment.
 Prevent electrostatic interference during use. If there is an abnormal
situation, please try multiple operations.
 Make sure to connect the ground when soldering the device.
 Make sure to disconnect the power after soldering the device.
 Keep the equipment dry and clean, away from damp, oily or dusty areas.
2. PRODUCT DETAILS
2.1 PRODUCT DESCRIPTION
The KC501 programmer has the following functions:
 Read and write car key remote control data and key frequency detection;
 Read and write data of on-board EEPROM chip;
 Read and write data of on-board MCU/ECU chip;
 The KC501 programmer needs to be used with the anti-theft related
diagnostic equipment of Shenzhen Xtooltech Co., Ltd. , and can also be
used with the PC-side programmer software. The product has stable
functions and reliable performance.

Xtool KC501 Specifications

General

Brand	Xtool
Model	KC501
Category	Diagnostic Equipment
Language	English