Xtool VAG401 - 3.6 Basic items setting.; 3.7 Route adaptation; 3.8 Coding

VAG401 VW/AUDI/SEAT/SKODA
www.Xtooltech.com 13
3.6 Basic items setting.
Select [04-Basic Settings] and then press [Enter]. The way of operating
likes that of point 3.4 regarding of measuring data value.
3.7 Route adaptation
Select [10-Adaptation] and then press [Enter]. The way of operating likes
that of point 3.4 regarding of measuring data value.
3.8 Coding
Select [07-Coding] and then press [Enter].It will display as the following.