VAG401 VW/AUDI/SEAT/SKODA
www.Xtooltech.com 16
3.11 System being ready
Press [15-Readiness] and then press [Enter], it shows as the following.
Press [Esc] to login out.
3.12 Professional function
Return to the main memu, choose [Diagnose] and then press [Enter]. Press
right arrow to go to the next page. Choose [Special Function]. Press [Enter].
It will show the following.
3.12.1 Choose [Oil Reset] and press [Enter]. it shows as the following:
If connect successfully, it displays the following one by one.
To Next Page
Loading...