Xtool VAG401 - Connect the VAG401

VAG401 VW/AUDI/SEAT/SKODA
www.Xtooltech.com 7
2. Connect the VAG401
2.1 Turn the ignition on.
2.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
2.3 Connect the VAG401 cable connector to the vehicle’s DLC. Turn on
the ignition, The VAG401 will auto start, the following screen will be
displayed.
2.4 Wait a moment, the screen will auto display the main menu:


 [Diagnose]: diagnose


 [Language]: language select


 [Contrast]: Contrast adaptation


 [Display Test]: Lcd test


 [Keypad Test]:Keypad test


 [Information]:show version