VESDA-EVEP-A00-P Product Guide
8 www.xtralis.com
Refer to Section 4.3.4 for information on connecting the Ethernet lead, and Section 5.1.2 for information on
creating connection profiles in Xtralis VSC.
A password is required to access the detector via ethernet connection. It is initially set using Xtralis VSC
during configuration with the USBport, and the user is required to enter it when creating an Ethernet
connection profile in Xtralis VSC. It is also necessary to enter additional PINcodes to access administrative
and distributor functions. Refer to Section 5.3 on page 51 for further information.
2.6 VESDAnet
A VESDAnet network allows:
l the VEP-A00 detector to report alarms and faults to a Fire Panel using a remote display module, remote
relay module or HLI.
l configuration and monitoring of devices from a central computer.
l connection to a reference detector.
Gateway function of the VEP-A00
The VEP-A00 detector also provides a gateway to the VESDAnet for a PC running Xtralis VSC connected to
the VEP-A00 via Ethernet, USB.
Refer to the VESDA Communications Guide for further information on VESDAnet network connectivity.
To Next Page
Loading...
Need help?
General
