VESDA-EVEP-A00-P Product Guide
www.xtralis.com 1
Table of Contents
1 Introduction 3
1.1 Features 3
2 Product Information 5
2.1 Detector Components 5
2.2 How the VEP-A00 works 5
2.3 Front Panel 6
2.4 Internal Buttons 7
2.5 Communication Ports 7
2.6 VESDAnet 8
2.7 Specifications 9
2.8 Dimensions 11
3 Pipe Network Design and Installation 15
3.1 Design Considerations 15
3.2 Installation Considerations 15
3.3 Pipe Inlets 15
3.4 Managing the Exhaust Air 16
4 Installation 17
4.1 Prepare the Detector 17
4.2 Mounting 18
4.3 Wiring 32
4.4 Powering Up 42
4.5 Installation Checklist 43
4.6 Preliminary System Check 44
5 Configuration 45
5.1 Communication between Xtralis VSC and the detector 45
5.2 Connecting to the Detector 49
5.3 Security 51
5.4 Commands 52
5.5 Configuration Options 55
5.6 Factory Default Settings 66
6 Commissioning 69
6.1 AutoLearn Smoke 69
6.2 AutoLearn Flow 70
6.3 Commissioning Smoke Test 70
7 Maintenance 71
7.1 Standby 71
7.2 Open the Door 72
7.3 Replacing the Filter 73
7.4 Remove the Fascia 76
7.5 Replacing the Aspirator 78
7.6 Replacing the Smoke Detection Chamber 80
7.7 Replacing the Sampling Module 84
7.8 Spare Parts 88
8 Troubleshooting 89
8.1 Fault Reporting through Relays 89
8.2 Troubleshooting with Xtralis VSC 90
A Commissioning Forms 91
A.1 VEP-A00 Detector Commissioning Configuration 93
A.2 ASPIRE Data 93
A.3 Smoke Test 93
To Next Page
Loading...
Need help?
General
