Xtrails VESDA-E VEP-A00 User Manual

VESDA-EVEP-A00-P Product Guide
54 www.xtralis.com
Command Description Execute From
A button
on the
Detector
Xtralis VSC
Software
Start Minor Fault Test Generates a minor fault on the detector and de-
energizes the fault relay for 2 minutes.
Start Alarm Test Simulates full scale smoke level which causes the
Alert, Action , Fire 1 and Fire 2 alarm conditions to
occur.
Alarm relays will energize unless the detector is
disabled.
Start Air Flow Fault Test Tests the air flow sensing system by shutting down
the aspirator.
Start Relay Test Tests the available relays by activating and
deactivating as required.
Start LED Test Tests each LEDby cycling through all LEDs on the
detector display panel.
Return to Factory
Defaults
Restores the configuration of the detector to the
initial factory default values.
Set System Date and
Time
Sets the detector date and time.
Table5-2: Detector Commands (continued...)

Xtrails VESDA-E VEP-A00 Specifications

General

Brand	Xtrails
Model	VESDA-E VEP-A00
Category	Smoke Alarm
Language	English