Xtralis VESDA VLS - Page 154

ASPIRE Software
7-10 VESDA Student Workbook
Exit ASPIRE software
• Click File
• Select Exit
Activity
Please complete checklist item 14:
14. Set ASPIRE Preferences
a. Launch ASPIRE33 software
b. Click Tools
c. Select Preferences
d. Click System
• Select America, US, and English
e. Click Project Defaults
• Set Enforced Limit to NFPA
• Set the Interface to Advanced
• Verify Hole sizes: 5/64”; 1/8”; 9/64”; 5/32”; 11/64”; 3/16”; 13/64”; 1/4”
f. Click General
• Select Show capillary relative direction
• Select Save reports in project file folder
• Set Tool Tip Delay to 10,000 ms
• Click Save
g. Click File
• Select Exit