VSC software
VSC provides local or remote connection to:
• VESDA VLF, VLC, VFT and ICAM IFT detectors via
RS-232
• Multiple VESDA devices on a VESDAnet via a High-
Level Interface (HLI)
• Multiple ICAM IFT or VESDA VFT detectors on a
Modbus RS-485 connection via a RS232 / RS485
converter
• ICAM IFT or VESDA VFT detectors via Modbus
TCP/IP
• VESDA VLI over USB or Ethernet
• Multiple individual and networked VESDA-E VEU/
VEP/ VES/ VEA detectors via USB/Ethernet/WiFi
• Multiple ECO detectors on Modbus RS-485 networks
• Multiple standalone ECO detectors via Modbus over
USB
Computer requirements
• Operating System: Microsoft Windows 10
• Processor Minimum: 1 GHz 32-bit (x86) or
64-bit (x64)
• Memory Preferred: 8 GB
• Minimum: 4 GB
• Hard Disk Minimum: 1 GB Free
• Display: single monitor, graphics card with
128 MB memory
To Next Page
Loading...
Need help?
General
