24
Use the Virtual Keyboard when you use front key and mouse. The factory default password is 1111.
It is highly recommended to assign a new password to protect the system. User can assign a new
password in SECURITY setup menu.
CONTROL BAR AUTO HIDE: Set to hide automatically or display continuously a control bar on the bottom
side in a Live mode.
CHANNEL INFORMATION: Display a channel number, channel name, resolution, frame rate, quality and
recording type of each channel.
SYSTEM INFORMATION: Display a software version, storage size, network type, IP address, MAC
address, DDNS status, DVR ID and remote controller ID of the system.
SYSTEM LOCK: To lock the system, user input a password. To unlock the system, please press ESC
button for 5 seconds on a front panel or a remote control. You can also unlock the system when pressing
LOCK icon on the screen using a mouse control. Then, the system will ask a password.
Table 2.1.1. Setup menu tree
DISPLAY
– OSD
– SEQUENCE
– SEQUENCE-DWELL TIME
– CHANNEL
- NAME
- COVERT
– VIDEO OPTION (HDMI/VGA)
RECORD
– CHANNEL
- RECORDING MODE
- RESOLUTION
- FRAME RATE
- QUALITY
- RECORDING
- SENSOR RECORDING
- PRE RECORD
- POST EVENT RECORD
- AUDIO
- SCHEDULE
DEVICE
– ALARM OUT
– CONTROLLER & PTZ
– CHANNEL
- MOTION ZONE
- MOTION SENSITIVITY
– KEY TONE
To Next Page
Loading...
Need help?
General
