Electrical hazards are indicated by the following specific symbol:
Electrical Hazard:
These are examples of other categories that can occur. They fall under the ordinary
hazard levels and may use complementing symbols:
• Crush hazard
• Cutting hazard
• Arc flash hazard
Safety
WARNING:
• The operator must be aware of safety precautions to prevent physical injury.
• Operating, installing, or maintaining the unit in any way that is not covered in this
manual could cause death, serious personal injury, or damage to the equipment. This
includes any modification to the equipment or use of parts not provided by Xylem. If
there is a question regarding the intended use of the equipment, please contact a
Xylem representative before proceeding.
• Do not change the service application without the approval of an authorized Xylem
representative.
CAUTION:
You must observe the instructions contained in this manual. Failure to do so could result
in physical injury, damage, or delays.
Qualified personnel
This product is intended to be operated by qualified personnel only.
Spare parts
WARNING:
Only use original spare parts to replace any worn or faulty components. The use of
unsuitable spare parts may cause malfunctions, damage, and injuries as well as void the
guarantee.
Disposal of packaging and product
Observe the local regulations and codes in force regarding sorted waste disposal.
Warranty
For information about warranty, see the sales contract.
Introduction and Safety
EOP1 Operator Panel Installation, Operation, and Maintenance manual 3
To Next Page
Loading...
Need help?
General
