Installation, Operating and Maintenance Instruction Model MPB, MPV
MPB, MPV Design
Permissible Forces / Torques on the DNS Suction
Joints
Joints,
MPB40.2
MPB40.3
DNS 65
MPB65.1
MPB65.2
DNS 100
MPB100.1
MPB100.2
MPV100.1
MPV100.2
DNS 125
MPV125.1
MPV125.2
DNS 150
General Instructions:
Direction of the forces and torques:
Fx ...Force in direction of the x-axis (pump shaft)
Fy ...Force in direction of the y-axis
(perpendicular to the x-axis)
Fz ...Force in direction of the z-axis
(perpendicular to the x-axis)
Mx ...Torque around the x-axis
My ...Torque around the y-axis
Mz ...Torque around the z-axis
The suction and pressure joints must be considered
separately.
If not all loads in effect reach the value limits, one of
these loads may exceed the usual value limit by 1.4
times. The following requirement must be observed
here:
∑ ∑ ∑ ∑
≤+ 2))/()/((
2
..max
2
..max zulberechnetzulberechnet
MMFF
Permissible Forces / Torques on the DND
Suction Joints in
Perpendicular to
MPB40.2
MPB40.3
DND 40
MPB65.1
MPB65.2
DND 65
MPB100.1
MPB100.2
MPV100.1
MPV100.2
DND 100
MPV125.1
MPV125.2
DND 125
MPB 100-english page 76
Article No 771074115