Xylem LOWARA ResiBoost MMW User Manual

ResiBoost
™
MMW, MTW
MMA, MTA
Applicare qui il codice a barre
Apply the adhesive bar code nameplate here
it Manuale di installazione, uso e
manutenzione.............................................. 2
nl Handleiding voor installatie, bediening en
onderhoud............................................... 138
en Installation, Operation, and Maintenance
Manual.......................................................24
no Installasjons-, drifts- og
vedlikeholdshåndbok............................... 161
fr Manuel d'installation, d'utilisation et
d'entretien..................................................45
sv Installations-, drift- och underhållshandbok
.................................................................181
de Montage-, Betriebs- und Wartungshandbuch
...................................................................68
pl Podręcznik instalacji, eksploatacji
i konserwacji............................................ 202
es Manual de instalación, funcionamiento y
mantenimiento........................................... 92
el Εγχειρίδιο εγκατάστασης, χειρισμού και
συντήρησης............................................. 224
pt Manual de Instalação, Operação e
Manutenção............................................. 115
tr Kurulum, Çalıştırma ve Bakım Kılavuzu.. 249
cod. 001085090 rev. E ed 01/2020

Xylem LOWARA ResiBoost MMW Specifications

General

Voltage	230 V
Frequency	50 Hz
Inlet/Outlet Size	1 inch
Protection Class	IP44
Material	Stainless Steel
Application	Residential water supply
Pump Type	Centrifugal
Protection	Dry-run protection

Summary

1.6 EU Declaration of Conformity (No LVD/EMCD37)

1.7 EU Declaration of Conformity (RoHS)

2 Transportation and Storage

3 Product Description

3.3 Technical data

Detailed specifications and parameters for the converter models.

4 Installation

4.1 Electrical requirements

Requirements for electrical connections and safety.

4.2 Mechanical installation

Guidelines for physically installing the converter and pump.

4.3 Hydraulic installation

Procedures and requirements for hydraulic connections.

4.4 Electrical installation

Guidelines and checks for electrical installation of the unit.

5 System Description

5.2 Start-up and programming

Steps for initial start-up and configuring converter parameters.

5.3 Programming

6 Alarms

6.1 Alarms and warnings

Overview of system alarms, fault indicators, and troubleshooting steps.

6.1.1 List of alarms

Detailed list of alarms, their causes, and troubleshooting solutions.

7 System Setup and Operation

7.1 Parameters to check upon startup

Key parameters to verify before starting the pump system.

9 Troubleshooting

9.1 Faults, causes, and remedies

Guide to identifying and resolving common faults, their causes, and solutions.